This guide is for workshop owners, production managers and first-time buyers who need a lathe and do not want to pay for capacity they will never use. It covers the five main lathe types, the questions to settle before asking for prices, new versus used, and what a supplier needs to quote accurately.
Types of lathe and turning machines and what each is for
Conventional (centre) lathe
The centre lathe is the general-purpose machine of the turning shop. The operator moves the tool with hand wheels and levers while the work is held in a chuck or between centres. It handles turning, facing, boring, threading and taper work on single parts and small batches. Pick it for repair, tool room and jobbing work, where every job is different.
CNC lathe
A CNC lathe performs the same operations from a program, using servo-driven axes and usually a tool turret. Once a job is proved, each part matches the last. Choose it for repeat batches, profiled parts and work where consistency matters. It needs programming skill, a stable power supply and a larger budget.
Capstan lathe
A capstan lathe is a manual production machine for small parts made from bar. Its turret sits on a short slide carried by a saddle clamped to the bed, so tool strokes are short and fast. Preset stops let a semi-skilled operator repeat the same tool sequence. It suits pins, bushes and fittings in medium batches where CNC is hard to justify.
Turret lathe
A turret lathe works on the same principle but is built heavier. The turret saddle travels directly on the bed, giving a longer stroke and a more rigid cut. That suits larger bar work and chucking work such as flanges, castings and forgings. Choose it over a capstan when the part is bigger or the cut heavier.
Copy lathe
A copy lathe uses a tracer that follows a template or master part, and the tool reproduces that profile on the workpiece. It is used for stepped and contoured shafts, and in woodturning for furniture legs and handles. It makes sense when the same profile repeats and you hold the templates. If profiles change often, a CNC lathe is more flexible.
How to choose: questions to answer before you buy
- Size of work. The largest diameter and longest part decide the swing over the bed and the distance between centres. For bar work, check the spindle bore too.
- Material. Tough materials and heavy cuts need a more rigid, more powerful machine than brass, aluminium or plastics do.
- Accuracy and finish. Do not pay for precision your drawings never ask for, and do not expect a worn machine to hold close fits.
- Batch size. One-off parts point to a centre lathe, repeating simple parts to a capstan or turret lathe, long runs and complex parts to CNC.
- Conventional or CNC. CNC earns its cost when the same parts return regularly. For varied repair work, a manual lathe is often quicker.
- Power supply. Confirm the phase and connected load at your premises. CNC machines need steady voltage.
- Floor space. Allow for bar stock behind the spindle, chip removal and maintenance access. Check that the doorway is wide enough for delivery.
- Operator skill. A manual lathe depends on a skilled turner. A CNC lathe depends on someone who can program and set tools.
- Budget. Include chucks, steadies, tooling, transport, installation and training.
New or used: an honest comparison
A new lathe makes sense when the machine will run every shift, when you need a current controller, or when a breakdown would cost you orders. New machines on MachineryInsider carry a 12-month warranty; see the new lathe and turning machines listed.
A used lathe makes sense when the work is general, the hours are moderate or the budget is fixed. Manual lathes are mechanically simple, and a well-kept one can give long service. For used lathe and turning machines, the year and condition are confirmed on enquiry, and you can inspect the machine before paying. Check these points:
- Bed and slideway wear. Look near the chuck, where most cutting happens. A ridge, or a carriage that tightens towards the tailstock, points to wear.
- Spindle condition. Run every speed. Listen for rumble, feel for heat and check for play at the chuck.
- Backlash. Test the cross slide and leadscrew. On a CNC lathe, ask about the ball screws.
- Running under load. Take a real cut on a test bar. Watch for chatter and measure for taper.
- Electricals and controller. Inspect the wiring and panel. On CNC machines, check the drives and turret indexing, and ask whether the controller is still supported.
- Spares availability. Confirm that bearings, gears and controller parts can still be bought.
- Paperwork. Ask for the original invoice and proof of ownership. Ask whether there is a loan on the machine, and get the lender’s clearance letter if there is.
If the purchase replaces an older lathe, you can sell your machine through the same marketplace.
What to send a supplier to get an accurate quote
A vague enquiry gets a vague price. Send these details:
- A drawing or photo of a typical part, with its largest diameter and length.
- The material and the quantity per batch.
- The tightest tolerance and the finish required.
- The lathe type preferred, and whether new, used or both.
- Accessories needed, such as chucks, steady rests, tooling or a digital readout.
- The power supply at your site.
- The delivery location and whether you need on-site installation.
Prices are on request. Use the request a quote form and a quote is sent within 4 working hours.
Common mistakes to avoid
- Choosing by swing alone and overlooking bed length and spindle bore.
- Buying a CNC lathe for one-off work with nobody to program it.
- Judging a used machine by fresh paint instead of a test cut.
- Leaving tooling and workholding out of the budget.
- Paying before ownership documents and loan status are clear.
Frequently asked questions
Which lathe machine is best for a small workshop?
For mixed repair and jobbing work, a conventional centre lathe is usually the best start. It handles the widest range of jobs and is simple to maintain. Size it for the largest part you turn regularly.
What is the difference between a capstan lathe and a turret lathe?
On a capstan lathe the turret moves on a short slide over a clamped saddle, which suits small, light bar work. On a turret lathe the saddle moves along the bed itself, giving more stroke and rigidity for bigger parts.
Should I buy a CNC lathe or a conventional lathe?
Buy CNC if the same parts repeat, shapes are complex or every part must be alike. Buy conventional if the work changes daily, batches are very small or you have skilled turners and no programmer.
Is it safe to buy a used lathe machine?
Yes, if you inspect it. See it running, take a test cut, and verify the invoice and loan status. On MachineryInsider the buyer can inspect a used machine before paying, and a tax invoice is issued with every purchase.
How much does a lathe machine cost?
It depends on type, size, age, condition and accessories, so a single figure would mislead. Send your part details and a quote follows within 4 working hours.
Start with the part, not the machine: its size, material, tolerance and quantity point to the right lathe. Compare new lathes and used lathes, or request a quote with your details. Delivery is arranged worldwide, remote installation support is included, and on-site installation is available on request.