Contractors, block yard owners, quarry operators and aggregate suppliers buy very different machines, but they share one risk: ending up with a machine that does not suit the material or the site. This guide covers the five machines that come up most often in construction and mining enquiries. It explains what each one does, what to settle before asking for a price, and how to judge a used machine.
Types of construction and mining machines and what each is for
Concrete mixer
A concrete mixer blends cement, sand, stone and water into a uniform mix. Drum mixers are the common choice on building sites. Pan and twin-shaft mixers give a stiffer, more even mix and are used to feed block plants and precast yards. Choose a mixer when you pour concrete yourself, or when a block machine in your line needs a steady supply of mix.
Brick making machine
A brick making machine compacts a mix in a mould by pressure, vibration or both. Depending on the mould, it produces solid blocks, hollow blocks, pavers, kerb stones, fly ash bricks or interlocking bricks. Machines range from hand-operated units to automatic plants. Mobile types lay blocks on a concrete floor, while stationary types work on pallets. Pick it when you plan to sell walling or paving units.
Tile making machine
A tile making machine forms thinner products where the surface finish matters: floor tiles, roof tiles and decorative paving tiles. Tiles are less forgiving than blocks, so mix, mould and curing need tighter control. Choose it over a brick machine when buyers want a finished, visible surface.
Stone crusher
A stone crusher breaks rock into smaller sizes. Jaw crushers take large feed and do the first reduction. Cone and impact crushers follow, and produce the sizes used in concrete and road base. Crushers are sold as fixed plants or mobile units. Pick one when you have access to rock or demolition rubble and a market for aggregate.
Sand making machine
A sand making machine takes small crushed stone and breaks and shapes it into manufactured sand. It normally sits after a crusher and works with a screen to control grading. Choose it when natural sand is scarce, costly or restricted in your area, or when concrete producers ask for consistent grading. It is one stage in a crushing line, not a plant on its own.
How to choose
Work through these points in order.
- End product. Name it exactly: ready concrete, hollow blocks, pavers, roof tiles, graded aggregate or sand. Each needs a different machine or mould.
- Daily output. Estimate what you can sell, then what you can cure, stack and deliver. Yard space and curing time often limit output more than the machine does.
- Raw material. For crushers and sand makers, rock type, hardness, feed size and moisture decide the machine. For brick and tile machines, say whether you use cement and aggregate, fly ash or clay.
- Automation level. Manual and semi-automatic machines need more labour but are simple to repair. Automatic plants cut labour, and need steadier power and trained staff.
- Power available. Check whether grid supply at the site is enough. Remote quarries and building sites often need a diesel engine or a generator.
- Space and layout. Crushing plants need room for feeding, stockpiles and trucks. Block yards need a large curing area.
- Operator skill. Decide who will maintain the machine. An automatic block plant or a cone crusher needs a mechanic who understands it.
- Budget. Count foundations, moulds, conveyors, screens, pallets, transport and early wear parts.
New or used?
Dust, shock loads and abrasive material wear these machines faster than most factory equipment. Condition matters more than age.
| Point | New machine | Used machine |
|---|---|---|
| Upfront cost | Higher | Lower |
| Condition | Unworn, with a 12-month warranty | Varies; year and condition are confirmed on enquiry |
Choose a new construction or mining machine when the plant will run every working day or when nobody on staff can rebuild a worn machine. A used machine suits a single project, a second line or a cautious start in a new market. You can inspect it before paying.
During the inspection, look at the following:
- Work under load. See the crusher take real rock, the mixer turn a full batch, the block machine make blocks. Running empty proves very little.
- Wear parts. Jaw plates, cone liners, blow bars, rotor tips, mixer blades and liners, moulds and tamper heads. Ask how much life remains.
- Structure and bearings. Look for cracks and weld repairs on the frame. Check bearings for heat, noise and play.
- Hydraulics. Look for leaks at cylinders and hoses. Check that pressure holds and the oil is clean.
- Electricals. Open the panel. Test motors, sensors and, on automatic plants, the controller.
- Spares availability. Confirm that liners, moulds and bearings are still supplied for that model.
- Paperwork. Ask for the purchase invoice or other proof of ownership. You will get a tax invoice for your own purchase.
- Finance. Ask in writing whether there is a loan on the machine. It has to be closed before you pay.
If a finished project has left you with an idle mixer or crusher, list it on the sell your machine page.
What to send a supplier to get an accurate quote
Prices on MachineryInsider are on request. A complete enquiry gets a usable quote, sent within 4 working hours. Put these details in the quote request form:
- Machine type, and whether new, used or both are acceptable.
- End product with sizes, including every block or tile shape you want a mould for.
- Raw material. For crushing: rock type, largest feed size and output sizes.
- Output required per hour or per shift.
- Fixed or mobile plant.
- Power source: grid, generator or diesel engine.
- Site details: space, truck access and any height limits.
- Delivery country and nearest port or city.
- Installation help needed: remote support or on-site.
Common mistakes to avoid
- Sizing a crusher for the output you want without checking the feed size it can accept.
- Buying a block machine and forgetting the mixer, pallets and curing space that go with it.
- Choosing a crusher type without knowing how hard and abrasive the rock is.
- Leaving screens and conveyors out of the budget. A crusher alone does not give graded product.
- Accepting a used machine on photos and a video of it running empty.
Frequently asked questions
Which machine do I need to start a block making business?
You need a brick making machine with the right moulds, a concrete mixer to feed it, pallets if the machine is a stationary type, and a yard for curing.
What is the difference between a stone crusher and a sand making machine?
A stone crusher reduces large rock to aggregate. A sand making machine takes the smaller crushed stone and turns it into well-shaped, sand-sized particles.
Can one brick making machine make different sizes of blocks?
Usually yes, by changing the mould. Ask which moulds are included and which can be added later.
Should I buy a mobile or a stationary crusher?
A mobile crusher suits short contracts, several sites and recycling work, because it moves with the job. A stationary plant suits a quarry with a long life and steady demand.
Match the machine to the material first, then to the output, then to the budget. Look through the new construction and mining machines and the used listings, and send a quote request when your details are ready. Delivery is arranged worldwide. Remote installation support is included, and on-site installation can be arranged on request.