A pack is only as good as its seal. This guide is for shop owners, small packers and factory buyers who need to pick a sealing machine. It covers the five common types, how to match one to your pack, what to look for in a used unit, and the details a supplier needs from you.
Types of sealing machines and what each is for
Sealers fall into two groups. Some close the mouth of a bag or pouch. Others work on bottles, jars and wrapped products.
Hand Sealer
A hand sealer is the simplest tool for closing a plastic bag. The operator lays the bag mouth on the sealing bar and presses the arm down, and a short pulse of heat welds the film. It needs almost no training. It suits shops, sample packing and home businesses with low daily volumes. Once one person is sealing bags all day, it is time to move up.
Band Sealer
In a band sealer, the bag mouth is gripped between two moving bands that pull it past heating blocks and then cooling blocks. The operator only feeds bags in, so output is far higher than with a hand sealer and the seal is more even. It is widely used for spices, snacks, grains and tea in pouches. Horizontal models suit light, dry packs. Vertical models suit bags that must stay upright, such as liquids and pastes.
Continuous Band Sealer
The names overlap in the market, and some sellers use both for the same machine. In most listings, a continuous band sealer means a heavier unit with its own conveyor, built to run through a full shift. Speed and temperature are adjustable, and many models can print or emboss a batch code on the seal. Pick this over a compact band sealer when bags are heavier, runs are longer, or the sealer sits at the end of a filling line.
Induction Sealer
An induction sealer is for bottles and jars, not bags. The cap carries a foil liner. When the capped container passes under the sealing head, the foil heats up without being touched and bonds to the rim. The result is a tight seal under the cap that shows whether the container has been opened. It is used for edible oil, sauces, medicines, agrochemicals and cosmetics. Hand-held units suit small batches, and conveyor units suit production lines.
Heat Shrink Tunnel
A shrink tunnel is a heated chamber with a conveyor running through it. It does not make a seal by itself. It shrinks film that has already been placed on the product: a neck band over a cap, a printed sleeve around a bottle, or a wrap around a bundle of cartons. Choose it when you need tamper bands, sleeve labels or bundled packs.
Quick match: pack type to sealer
| What you are sealing | Sealer to look at |
|---|---|
| A few plastic bags a day | Hand sealer |
| Filled pouches in steady batches | Band sealer |
| Heavy bags or full-shift runs | Continuous band sealer |
| Bottles and jars with lined caps | Induction sealer |
| Neck bands, sleeves and bundle wraps | Heat shrink tunnel |
How to choose a sealing machine
Work through these points in order.
- Pack and material. Is it a bag, a pouch, a bottle or a wrapped bundle? What is the film or laminate, and how thick is it?
- Size and weight. Note the widest bag mouth, the heaviest filled pack, or the cap diameter. A heavy bag needs a conveyor to support it.
- Output needed. Count the packs you must seal in a shift.
- Automation level. Decide whether an operator will feed each pack or the sealer will take packs straight from a filling machine.
- Power supply. Small sealers run on single-phase power. Larger tunnels and line machines may need three-phase.
- Space. A hand sealer fits on a counter. A tunnel with infeed and outfeed conveyors needs a clear run of floor.
- Budget. Include consumables such as heating elements, sealing bands and coding ink if you print on the seal.
- Operator skill. Temperature and speed must be set for each film. Choose controls your staff can understand and repeat.
New versus used sealers
Small sealers are simple and cost little compared with other packing equipment, so buying new is often the easy decision. A new unit comes with fresh heating parts and, on MachineryInsider, a 12-month warranty. See the new sealing machines on offer.
Used starts to make sense with the larger machines: conveyor band sealers, line induction sealers and shrink tunnels. Look through the used sealing machines, ask for the year and condition, and inspect the machine before you pay. During the inspection:
- Run it at working temperature with your own bags or bottles.
- Check the wear parts: sealing bands, heating blocks, drive belts, conveyor belt and pressure wheels.
- On an induction sealer, check the sealing head and its cooling. On a tunnel, check the heaters, blower and insulation.
- Open the panel. Look at the temperature controller, contactors and wiring for heat damage or makeshift repairs.
- Ask if spares are still supplied for that model.
- Ask for the seller’s purchase invoice, and confirm there is no loan outstanding against the machine.
Every purchase through the marketplace comes with a tax invoice. If you are upgrading, you can also list your old sealer for sale.
What to send a supplier to get an accurate quote
- Type of pack: bag, pouch, bottle, jar or bundle
- Material and thickness of the film, or the cap and liner details
- Bag width and filled weight, or cap diameter and bottle height
- Product inside: dry, liquid, oily or dusty
- Packs per shift
- Whether you need batch or date coding on the seal
- Stand-alone machine or part of a line
- Power supply at your site
- New or used preference, and delivery location
Put these into the quote request form. Prices are on request, and a quote is sent within 4 working hours.
Common mistakes to avoid
- Buying a sealer without testing it on your actual film. Films that look alike can seal very differently.
- Ordering an induction sealer before fixing the cap and liner. The liner must suit the container material.
- Running the heat too high to gain speed. It burns the film and shortens the life of the bands.
Frequently asked questions
Which sealing machine is best for plastic pouches?
For small numbers, a hand sealer is enough. For regular production, a band sealer gives faster and more even seals. If the pouches are heavy or the work runs all shift, look at a continuous band sealer with a conveyor.
What is the difference between a hand sealer and a band sealer?
A hand sealer seals one bag at a time when the operator presses the arm. A band sealer carries bags through the heat on moving bands, so the operator only feeds them in.
Can a band sealer seal aluminium foil pouches?
Yes, if the pouch has a heat-sealable inner layer, which laminated foil pouches normally do. They need more heat than plain plastic, so tell the supplier the material and test before buying.
Do I need a shrink tunnel if I already have a sealer?
Only if you use shrink film. A band sealer closes a pouch. A tunnel shrinks a sleeve, neck band or wrap. They do different jobs.
Where to go from here
Fix the pack first, then the output, then the machine. You can compare new and used sealing machines on MachineryInsider, or ask for a quote if you are unsure which type fits. Delivery is arranged worldwide, remote installation support is included, and on-site installation can be requested.